Jaybird™ 1.5 Inch Tri Clover
Ultimate Carbonation Stone
(2 Micron)
“Oxygen” stones have long been a staple tool in the “advanced” home brewer’s toolbox at the wort level. What better way to get yeast excited about their upcoming buffet than to blow fine bubbles of oxygen through it? Dinner time, yeasty boys!
If oxygen works at the wort level, then why not use an oxygen stone - but blow CO2 through it - at the finished beer level?
Why not indeed! Turns out using an oxygen stone as a carbonation stone can reduce carbonation time to as little as 24 hours, and with NO CARBONATION BITE!
Our customers constantly challenge us to bring “pro” technology to the home brewer. So here ya go…
The 1.5 Inch Tri Clover Ultimate Carbonation Stone connects to your wort or beer source using standard 1.5” tri clover clamp (SKU# 808, sold separately) and gasket (SKU# 1676, sold separately)
This unit is rugged enough to be used for forced pressure transfers between vessels, and for purging oxygen out of a vessel (by displacing it with heavier CO2).
The gas port “in” is a standard Gas Ball Lock post, accepts any standard barbed (SKU# 0132) or flared (SKU# 0134) gas ball lock connector (sold separately).
The oxygen stone (included) is our 2 micron, industry standard 1/4" FFL flared connection type (SKU# 2049). It threads into the 304 stainless steel housing, and is easily removed for cleaning. Do not touch the porous section of the oxygen stone with fingers, as even a tiny amount of oils on fingers / skin can plug the pores. Best way to clean the stone is submersing it in boiling water for a few minutes.
Sanitize the stone in sanitizing solution (such as Star San) prior to immersing into cooled wort.
Due to the possibility of the oxygen stone being mishandled (see above) there are NO RETURNS on this item.
This item’s steel housing protects MOST of the stone (in case you drop it), but about 1/4 of an inch will stick out past the connection gasket, into your wort or beer vessel.
To summarize:
· Add oxygen to wort to get yeast excited
· Add CO2 to beer to dramatically reduce carbonation time
· Force transfer between vessels oxygen-free
CHARACTERISTICS and SPECIFICATIONS:
· Metal components are 304 Stainless Steel
· Carbonation stone: 2 micron, 1/4" FFL threads, removable for cleaning
· Connection: Standard 1.5” tri clover / tri clamp
· Gas supply connection: Standard Gas Ball Lock post
· Over-all length (from tip of ball lock post to tip of oxygen stone) 3.25 inches
· Over-all width 2 inches
